Get the most competitive rates without any distributor markups.
We eliminate the extra costs associated with resellers, passing the savings directly to you.
Tailor your best lasers for hair removal to your specific needs and branding.
Benefit from our rigorous quality control and industry-leading manufacturing standards.
Receive your order quickly and securely with our trusted global logistics partners.
Why pay more for the same technology? As a leading diode laser hair removal manufacturer, we eliminate middlemen to pass on direct savings. Unlock our unbeatable factory – direct pricing on diode laser hair removal machine now!
Hair Type Targeted Hair Removal: Whether it is fine and soft downy hair, or coarse and hard hair, 810nm diode laser hair removal can work. It can adjust the parameters of laser energy and pulse width according to the characteristics of hairs such as thickness and color to achieve the best hair removal effect. For example, for coarse and hard armpit hair, higher energy and longer pulse width may be needed to completely destroy the hair follicle; while for fine and soft lip hair, lower energy and shorter pulse width can be used to avoid damage to the surrounding skin.
Consultation and communication: The patient and the doctor communicate with each other, informing the doctor of their medical history, hair removal history, etc., and the doctor introduces information about laser hair removal. Skin test: test on a small area of skin to check the response to the laser and determine the appropriate parameters. Hair treatment: patients shave the treatment area in advance, be careful not to pluck hair or use wax to remove hair.
1. Apply cooling gel: Apply an even layer of cooling gel on the skin of the treatment area. The cooling gel cools and protects the skin, reduces thermal damage to the skin during laser treatment and improves the efficiency of laser delivery. 2. Laser irradiation: The doctor uses a diode 810 laser hair removal machine to irradiate the treatment area. The laser emits laser light at a 808 wavelength nanometers, which is selectively absorbed by the melanin in the hair follicle. The heat generated by the melanin absorbing the laser energy destroys the hair follicle, resulting in hair removal.
1. Immediate care: apply cold compresses immediately after treatment to relieve redness, swelling and burning sensation of the skin and reduce discomfort. 2. Daily care: avoid water on the treatment area during the recovery period, keep it clean and dry to prevent infection; avoid sauna, hot springs and other high-temperature environments to reduce the stimulation of the skin; go out and apply sunscreen, use umbrellas, etc., to prevent hyperpigmentation of the treatment area due to ultraviolet irradiation; avoid scratching and friction of the skin of the treatment area, so as not to damage the skin.
The cost of diode laser machines treatments is influenced by a number of factors including the area to be treated, the number of treatments, the location of the facility, the geographic location, the operator’s experience and reputation, and the competition in the marketplace. On average, market pricing for a full course of diode laser epilation treatments (usually 6 – 8 sessions) is generally in the range of $1,200 – $2,500, with a single session usually costing around $200 – $350.
Based on market feedback and cooperation experience, best laser hair removal can help distributors with significant technical advantages, high market acceptance and strong customer demand: Start to realize significant sales growth and profitability usually within 6 - 12 months (the exact length of time depends on the speed of market development and sales capacity). After establishing a stable sales channel, they can achieve annual profit margins of 20% - 35% or more through continued equipment sales and possibly consumables or service revenues, putting them on a steady track to profitability. The key is effective market coverage and good customer relationship management.
Diode laser hair removal machine price averages $80 - $120 for a single treatment and $500 - $800 for a course of 6 - 8 treatments. A well-run salon can conservatively attract 15 - 25 new clients per month, with a potential revenue of $1,200 - $3,000 per month or more, and typically recoup the cost of the equipment within 5 - 10 months. Once the cost is recovered, the diode laser for hair removal program can be a powerful source of profit. Because it is non-invasive, requires no recovery period after treatment, and has a short treatment time (approximately 20 - 30 minutes), it has high customer acceptance, repurchase and referrals. Depending on customer traffic and pricing, the annual net profit potential is huge, and is expected to bring tens of thousands of dollars or even more to the salon's annual net profit, significantly improving the overall profitability.
A single diode laser hair removal machine treatment at a medical facility can cost $300 - $500, and 4 - 6 sessions can cost $1200 - $2500. Best diode laser hair removal at home can be purchased for as little as $1,500 and can save more than 80% in the long run. However, it is important for individual buyers to follow strict guidelines when using a home device to ensure safe and effective treatments and to avoid skin burns, hyperpigmentation, and other problems associated with improper use.
Connect the power supply, turn on the air switch, then press the front panel button to turn on the machine.
Power on page: enter correct password 000000, select gender (male/female), wavelength (755nm/810nm/1064nm) and then enter the operation interface.
Operation interface: select the treatment area, skin type (from white to black); set the energy, frequency (energy according to the customer’s feelings from low to high settings, frequency set to 1 – 3Hz); set the treatment time (a single part of about 15 – 20 minutes); select the mode of operation (single pulse/continuous pulse); set the parameters and then click on any mode, there will be a prompt to whether to save the data, choose Select “Yes”, the next time you turn on the machine and select one of the modes, it will be the previously set parameters.
755nm laser:The 755nm wavelength is the optimal absorption wavelength for melanin. Utilizing the principle of selective photothermal laser therapy, it directly targets melanocytes within the hair follicles, effectively destroying them. This wavelength is highly effective for hair removal, particularly for fine or light hair, such as lip hair, facial hair, or hair that remains after repeated depilation treatments.
810nm laser:The 810nm diode laser machine offers excellent uniformity and deeper penetration. It is also a highly effective wavelength for targeting melanocytes, based on the selective photothermal effect. By focusing on the melanin in hair follicles as the target chromophore, it effectively destroys the follicles, delivering superior hair removal results.
1064nm laser:The 1064nm wavelength is characterized by its deep penetration, long pulse width, and wide range of energy density. It is suitable for hair removal on all skin types (especially types IV to VI) and can effectively treat hair of any color except white.
1.Screen 2.ON/OFF button 3.Handle 4.Handle port 5.Power socket
6.Air Switch 7.Fan 8.Water hole 9.Overflow 10.Drainage hole
♥ The environment where the instrument is installed and used requires cleanliness, low dust, temperature 5℃-35℃, relative humidity ≤80%, no corrosive particles, conductive dust, etc., and avoid strong magnetic field interference;
♥ Choose a well-ventilated location, not to be placed near heat sources such as radiators, heat ventilation ducts or places prone to mechanical vibration;
♥ In order to ensure the accuracy of the output energy, please keep all parts of the output port of the treatment handpiece clean;
♥ After the instrument is used, wait for 5 minutes and then turn off the power, clean the treatment head and keep it;
♥ When cleaning the treatment room, avoid raising dust as much as possible, especially on the carpeted floor, and make sure the air vents are smooth;
♥ Thoroughly clean the treatment head regularly to keep it clean, so as not to cause the laser output to weaken, you can use lens paper or cotton swabs dipped in anhydrous ethanol (95% alcohol) or special lens cleaner to gently wipe;
♥ Do not use flammable materials to clean and sterilize the treatment head and treatment area during operation;
♥ Do not use gasoline, alcohol, thinner and other chemically treated rags to wipe the surface of the chassis;
♥ The complex internal structure of the instrument, it is strictly prohibited to disassemble by yourself, please be sure to contact our customer operations department in a timely manner when a malfunction occurs;
♥ In order to ensure the normal use of the instrument, the purchase or replacement of instrument accessories, please contact the manufacturer or agent directly.
Laser power | Input based on actual tile number |
Laser heat dissipation form | semiconductor refrigeration + water + TEC cooling constant temperature cooling |
Laser type | 810nm semiconductor laser |
Laser wavelength | 810nm,755nm,1064nm |
Pulse width | 10ms-200ms |
Frequency | 1-10Hz |
Max power | 100J/cm2 |
Light outlet | 15mm * 15mm |
Temperature | 22-28°C |
Water flow | 5L/min |
LCD screen | 10.4′ Touch LCD |
Water tank | Built – in water tank |
Input voltage | 100-120V/60Hz;220V-240V/50Hz |
Packing Size | 58*58*124/84kg |
Batch customization:
Marketing support:
Appearance customization:
Software interface customization:
Accessory customization:
Safety features are customized:
Customization of software functions:
Delya provides professional OEM/ODM customization service to help you build your own smart beauty device product line. With our rich industry experience, patented technologies and mature supply chain system, we are able to fulfill your needs in terms of product design, functionality and quality. Choose Delya to make your brand stand out in the competitive market!
Through customization, customers can create one-of-a-kind products and increase their competitiveness in the market by up to 30%.
Customized products effectively showcase the brand image, with 70% of consumers reporting a more favorable perception of the brand. This results in a 25% increase in overall brand value.
Customized services can be tailored to precisely meet a customer's unique needs. Customer satisfaction increased by 40%.
The added value of customized products is typically 50% higher. This significant increase in value directly leads to a 60% increase in the client's profitability.
Adopt aviation packing box and waterproof winding film to protect the goods in all aspects. Various modes of transportation are available to ensure that goods are delivered within 7 days.
Provide market data, operation program, operation training, marketing support and price protection to boost marketing.
We offer 24/7 service, resolving after – sales issues within 1 hour. The mainframe has a 2 – year warranty. With Japan and Europe offices and service centers, we ensure seamless global support.
Provide detailed manuals and professional operation videos, customers can learn according to the manuals can be skillful.
Because our factories meet ISO quality management requirements, Delya‘s products are manufactured in accordance with CE, MSDS, RoHS, and FCC standards. Over the years, we have obtained numerous certifications to provide you with effective product quality assurance.
English 
Dutch 
Spanish 
French 
German 
Italian 
Portuguese 
Russian 
Turkish 
Arabic 
Thai 
Hindi 
Romanian