Get the most competitive rates without any distributor markups.
We eliminate the extra costs associated with resellers, passing the savings directly to you.
Tailor your best lasers for hair removal to your specific needs and branding.
Benefit from our rigorous quality control and industry-leading manufacturing standards.
Receive your order quickly and securely with our trusted global logistics partners.
Why pay more for the same technology? As a leading diode laser hair removal manufacturer, we eliminate middlemen to pass on direct savings. Unlock our unbeatable factory – direct pricing on diode laser hair removal machine now!
Hair removal on all parts of the body:
Hair Type Targeted Hair Removal: Whether it is fine and soft downy hair, or coarse and hard hair, best laser hair removal can work. It can adjust the parameters of laser energy and pulse width according to the characteristics of hairs such as thickness and color to achieve the best hair removal effect. For example, for coarse and hard armpit hair, higher energy and longer pulse width may be needed to completely destroy the hair follicle; while for fine and soft lip hair, lower energy and shorter pulse width can be used to avoid damage to the surrounding skin.
Consultation and communication: The patient and the doctor communicate with each other, informing the doctor of their medical history, hair removal history, etc., and the doctor introduces information about diode laser epilation. Skin test: test on a small area of skin to check the response to the laser and determine the appropriate parameters. Hair treatment: patients shave the treatment area in advance, be careful not to pluck hair or use wax to remove hair.
Step 1: Apply Cooling Gel Apply a layer of special cooling gel on the area to be removed, which is like a “protective coat” for the skin, cooling and protecting the skin so that the laser can work better. Step 2: Precision Laser Hair Removal The doctor will use a professional 808 laser device, which emits a laser that is particularly smart and can accurately find the melanin in the hair. After the laser turns into heat energy, it will gently make the hair follicle “dormant”, so that the hair will not easily grow back. Usually, after 3-5 times, you can see obvious results.
1. Immediate care: apply cold compresses immediately after treatment to relieve redness, swelling and burning sensation of the skin and reduce discomfort. 2. Daily care: avoid water on the treatment area during the recovery period, keep it clean and dry to prevent infection; avoid sauna, hot springs and other high-temperature environments to reduce the stimulation of the skin; go out and apply sunscreen, use umbrellas, etc., to prevent hyperpigmentation of the treatment area due to ultraviolet irradiation; avoid scratching and friction of the skin of the treatment area, so as not to damage the skin.
The cost of diode laser for hair removal treatments is influenced by a number of factors including the area to be treated, the number of treatments, the location of the facility, the geographic location, the operator’s experience and reputation, and the competition in the marketplace. On average, market pricing for a full course of laser diode treatment (usually 6 – 8 sessions) is generally in the range of $1,200 – $2,500, with a single session usually costing around $200 – $350.
Based on market feedback and cooperation experience, 808 nm laser therapy can help distributors with significant technical advantages, high market acceptance and strong customer demand: Start to realize significant sales growth and profitability usually within 6 - 12 months (the exact length of time depends on the speed of market development and sales capacity). After establishing a stable sales channel, they can achieve annual profit margins of 20% - 35% or more through continued equipment sales and possibly consumables or service revenues, putting them on a steady track to profitability. The key is effective market coverage and good customer relationship management.
Diode laser hair removal machine price averages $80 - $120 for a single treatment and $500 - $800 for a course of 6 - 8 treatments. A well-run salon can conservatively attract 15 - 25 new clients per month, with a potential revenue of $1,200 - $3,000 per month or more, and typically recoup the cost of the equipment within 5 - 10 months. Once the cost is recovered, laser hair removal professional machine program can be a powerful source of profit. Because it is non-invasive, requires no recovery period after treatment, and has a short treatment time (approximately 20 - 30 minutes), it has high customer acceptance, repurchase and referrals. Depending on customer traffic and pricing, the annual net profit potential is huge, and is expected to bring tens of thousands of dollars or even more to the salon's annual net profit, significantly improving the overall profitability.
A single diode laser hair removal near me at a medical facility can cost $300 - $500, and 4 - 6 sessions can cost $1200 - $2500. Diode laser hair removal at home can be purchased for as little as $1,500 and can save more than 80% in the long run. However, it is important for individual buyers to follow strict guidelines when using a home device to ensure safe and effective treatments and to avoid skin burns, hyperpigmentation, and other problems associated with improper use.
808nm laser is making their mark in the field of permanent hair removal, based on semiconductor technology that is capable of emitting coherent projected light covering the visible to infrared range. The device utilizes a narrow spectrum of light beams to precisely target specific hair color clusters in the skin.
Compared to systems such as ruby, fiber and alexandrite lasers, the diode laser wavelength stand out for their deeper tissue penetration and superior melanin targeting capabilities. This advantage makes it the gold standard in laser hair removal, offering safer and more efficient hair removal solutions for different skin tones, hair types and body parts.
Often, it is a common belief that laser hair removal removes hair once and for all. In fact, there is some validity to this statement, but it is not entirely accurate. This is because patients are able to achieve roughly 90% hair reduction in this way. Hair removal treatments with diode laser technology are certainly an attractive alternative to traditional methods of hair removal such as shaving, waxing, the use of depilatories or electrolysis.
Diode 808 laser hair removal machine originated from Germany, according to the principle of selective photo thermodynamics, through reasonable adjustment of wavelength energy and pulse width, so that light can pass through the skin surface to the hair root hair follicle, so that the hair follicle tissue is damaged, slow growth or no growth, and there is a skin rejuvenation effect. The rapid freezing point hair removal system adopts a unique freezing technology, which can cool the local skin to 5 degrees Celsius, overcoming the shortcomings of cold touch lighting, convenient and simple operation, no damage to the skin, easy hair removal.
Photon skin rejuvenation is a non-invasive cosmetic technique that utilizes light energy conversion and biological effects to address skin issues like pigmentation, vascular dilation,fine lines, and sagging, promoting natural repair and renewal for comprehensive skin improvement.
Golden Standard Diode 808nm Laser Hair Removal
Among the many methods of hair removal, diode 808 laser hair removal is at the gold standard. Light at a wavelength of 808nm is absorbed by the melanin in the hair follicle while significantly reducing the absorption of water and hemoglobin. This makes the procedure safe and painless for the epidermis. In the best professional permanent hair removal treatments, patients feel no pain at all.
Before carrying out the hair removal treatment, clean and disinfect the treatment area.
To ensure better energy transmission to the skin, it is necessary to shave the exposed hair for removal.
The cooling gel can alleviate discomfort during treatment. Therefore, before commencing the treatment, apply an appropriate amount of cooling gel onto the treatment area.
Gradually adjust the pulse width and the corresponding power frequency to attain the optimal user experience.
The approach for hair depilation: The handpiece (Sapphire) should be adhered tightly to the skin and slide back and forth 6 to 7 times. During this treatment, observe the alterations of the skin.
After completing the treatment, clean the treatment area once again. If necessary, perform an ice compress on the partial skin for 10 to 15 minutes.
True semiconductor contact cooling technology is utilized.
This innovative technology utilizes an intelligent epidermal protection mechanism to form an effective thermal barrier during treatment, avoiding the risk of epidermal burns. Combined with the patented cooling system, it truly realizes the “icy point painless” treatment experience, and allows the candidates to complete the course of treatment under the state of comfort throughout the whole process.
As the chip in the macro channel begins to work, cooling water circulates inside the laser to remove excess heat, thus ensuring that the chip is able to function properly.
The diode laser stack consists of 6 laser rods mounted on a large copper heat sink. The laser is equipped with an aluminum housing, the electrodes are located at the back of the stack and the water holes are located at the bottom of the stack.
The process of diode laser’s working is the change from electric energy to light and heat energy. When the chip which is inside the macro channel is working, the cooling water flows inside the laser stack meanwhile bringing the extra heat and making sure the chip going well.
Diode Laser Stack has 6 pcs bars mounted on a big copper heatsink. This stack has an aluminum shell. Electrodes are on the back of the stack. water holes are on the bottom of the stack.
After selecting the skin type, hair size and thickness prior to the treatment, the system will upload the recommended parameters. However, since each patient reacts differently, the doctor should adjust the suggested parameters accordingly, taking into account the patient’s actual feelings during the treatment.
♥ The environment where the instrument is installed and used requires cleanliness, low dust, temperature 5℃-35℃, relative humidity ≤80%, no corrosive particles, conductive dust, etc., and avoid strong magnetic field interference;
♥ Choose a well-ventilated location, not to be placed near heat sources such as radiators, heat ventilation ducts or places prone to mechanical vibration;
♥ In order to ensure the accuracy of the output energy, please keep all parts of the output port of the treatment handpiece clean;
♥ After the instrument is used, wait for 5 minutes and then turn off the power, clean the treatment head and keep it;
♥ When cleaning the treatment room, avoid raising dust as much as possible, especially on the carpeted floor, and make sure the air vents are smooth;
♥ Thoroughly clean the treatment head regularly to keep it clean, so as not to cause the laser output to weaken, you can use lens paper or cotton swabs dipped in anhydrous ethanol (95% alcohol) or special lens cleaner to gently wipe;
♥ Do not use flammable materials to clean and sterilize the treatment head and treatment area during operation;
♥ Do not use gasoline, alcohol, thinner and other chemically treated rags to wipe the surface of the chassis;
♥ The complex internal structure of the instrument, it is strictly prohibited to disassemble by yourself, please be sure to contact our customer operations department in a timely manner when a malfunction occurs;
♥ In order to ensure the normal use of the instrument, the purchase or replacement of instrument accessories, please contact the manufacturer or agent directly.
Parameter | Hair-Removal Handpiece |
Spot | 13*30MM |
Screen Pixel | 1080×1920 |
Handpiece Shots | 50000000 Shots |
Frequency | 1-10HZ |
Energy | 1-120J/CM2 |
Whole – machine Power | 2000W |
Pulse Width | 1MS -20MS |
Voltage | 200-240V |
Heat Dissipation | Semiconductor Refrigeration + Air Cooling + TEC Refrigeration |
Packaging Size | 62*56*142 |
Language | Support Customization of Various Languages |
Water Tank | 5L |
Gross Weight | 70KG |
Parameter | Photon Rejuvenation |
Energy | 1-50]/m2 |
Pulse Width | 1-10ms |
Frequency | 1-10HZ |
Wavelength | 515/560/590/615/640/695 |
Batch customization:
Marketing support:
Appearance customization:
Software interface customization:
Accessory customization:
Safety features are customized:
Customization of software functions:
Delya provides professional OEM/ODM customization service to help you build your own smart beauty device product line. With our rich industry experience, patented technologies and mature supply chain system, we are able to fulfill your needs in terms of product design, functionality and quality. Choose Delya to make your brand stand out in the competitive market!
Through customization, customers can create one-of-a-kind products and increase their competitiveness in the market by up to 30%.
Customized products effectively showcase the brand image, with 70% of consumers reporting a more favorable perception of the brand. This results in a 25% increase in overall brand value.
Customized services can be tailored to precisely meet a customer's unique needs. Customer satisfaction increased by 40%.
The added value of customized products is typically 50% higher. This significant increase in value directly leads to a 60% increase in the client's profitability.
Adopt aviation packing box and waterproof winding film to protect the goods in all aspects. Various modes of transportation are available to ensure that goods are delivered within 7 days.
Provide market data, operation program, operation training, marketing support and price protection to boost marketing.
We offer 24/7 service, resolving after – sales issues within 1 hour. The mainframe has a 2 – year warranty. With Japan and Europe offices and service centers, we ensure seamless global support.
Provide detailed manuals and professional operation videos, customers can learn according to the manuals can be skillful.
Because our factories meet ISO quality management requirements, Delya‘s products are manufactured in accordance with CE, MSDS, RoHS, and FCC standards. Over the years, we have obtained numerous certifications to provide you with effective product quality assurance.
English 
Dutch 
Spanish 
French 
German 
Italian 
Portuguese 
Russian 
Turkish 
Arabic 
Thai 
Hindi 
Romanian