Économisez 20% en allant directement à la source !
Bénéficiez des tarifs les plus compétitifs sans aucune marge de distributeur.
Nous éliminons les coûts supplémentaires associés aux revendeurs, vous faisant bénéficier directement des économies réalisées.
Tailor your magnetic therapy ring to your specific needs and branding.
Bénéficiez de notre contrôle qualité rigoureux et de nos normes de fabrication à la pointe de l’industrie.
Recevez votre commande rapidement et en toute sécurité grâce à nos partenaires logistiques mondiaux de confiance.
Why pay more for the same technology? As a leading magnetic therapy machine manufacturer, we eliminate middlemen to pass on direct savings. Unlock our unbeatable factory – direct pricing on magnetic field therapy now!
✅Bone Repair
✅Blood Circulation
✅Organ Health
✅Bosst Lmmunily
✅Muscular Repair
✅Pain Relief
3D body fat scanning + AI skin analysis, generating accurate treatment maps in 30 seconds. Automatic identification of forbidden treatment areas (e.g. neurovascular intensive areas). Intelligent recommendation of personalized program (wavelength/energy/treatment cycle).
1. Locate the treatment area: Expose the skin or muscle/joint area to be treated and mark the area of pain or inflammation. 2. Laser irradiation: Aim the laser probe vertically at the treatment area, approximately 1~5cm from the skin (contact or non-contact). Duration of irradiation: typically 30 seconds to 5 minutes per spot (depending on condition and device parameters). 3. Laser action: Promotes cellular metabolism (enhances ATP synthesis). Reduce inflammation (inhibit inflammatory mediators such as prostaglandins). Accelerates microcirculation and tissue repair. Electromagnetic field assistance, simultaneously or alternately applied low-frequency pulsed electromagnetic field (frequency may be 1Hz~100Hz).
Continuous repair: Acute injuries (e.g. sprains, strains): usually 2~4 weeks of significant recovery. Chronic conditions (e.g. osteoarthritis, tendonitis): 4~6 weeks or more with comprehensive treatment. Functional recovery: Reduced frequency and intensity of pain and improved ability to perform daily activities. Accelerated postoperative wound healing (e.g. after tooth extraction or surgical incision).
Acute conditions (e.g., sprains, inflammation): usually 5-10 sessions are required. Chronic conditions (e.g. arthritis, chronic pain): may require 10-20 sessions or more, depending on efficacy. Post-operative recovery/wound healing: 1 session per day is recommended for 5-7 days, then less frequently depending on recovery.
Routine recommendations:1x daily (acute or high intensity therapy); 1 every other day (chronic or maintenance therapy).
Special Conditions: High-power lasers may need to be spaced 48-72 hours apart (to avoid overheating of tissue); Skin problems (e.g. ulcers) may require 2-3 treatments per week.
Localized irradiation: 3-10 minutes per site (depending on laser power and depth of lesion).
Large area treatment: can be extended to 10-20 minutes, divided into areas.
Low Level Laser (LLLT): Usually no more than 15 minutes for a single session.
1. Pain management (arthritis, muscle strain, neuralgia, etc.)
Before treatment: patients usually have significant moderate-to-severe pain (VAS score 6-10), limited joint or muscle mobility, which may be accompanied by inflammatory reactions such as redness, swelling, and fever, and need to rely on pain medication to relieve symptoms.
After treatment: pain is significantly reduced (VAS score reduced to 1-4), joint mobility is improved, inflammatory reactions (redness, swelling, fever) subside, and reliance on pain medication is reduced or even stopped.
2. Wound healing (postoperative incisions, diabetic foot ulcers, etc.)
Pre-treatment: Wound healing is slow, may be accompanied by exudate, redness, swelling or signs of infection, pain is evident, and healing time exceeds normal expectations.
After treatment: Wound healing is accelerated, exudate decreases or stops, inflammation subsides, wound area decreases and gradually crusts or epithelializes, pain is significantly reduced.
3. Muscle Injury/Sports Rehabilitation
Before treatment: decreased muscle strength, pain or stiffness during exercise, longer recovery period, affecting daily activities or training.
After treatment: muscle function improves, pain is reduced, recovery speed is accelerated, and exercise ability gradually returns to normal.
4. Chronic inflammation (e.g. tendonitis, bursitis)
Before treatment: long-term recurrent pain, localized swelling, symptoms worsened after activities, traditional treatment has limited effect.
After treatment: inflammation is reduced, the frequency of pain episodes is reduced, joint or tendon movement is smoother, and the quality of life is improved.
5. Nerve injury (e.g. sciatica, peripheral neuropathy)
Before treatment: numbness, tingling or burning sensation, which may be accompanied by muscle weakness, affecting daily walking or fine motor movements.
After treatment: nerve symptoms (numbness, tingling) are reduced, nerve conduction is improved, and muscle strength is gradually restored.
Domestic basic model: $700-7,000/unit. Imported high-end models (German/Italian brands): $7,000-42,000/unit.
1. Single treatment pricing: Basic program: $30-$140 per session. Treatment packages (10 sessions): $280-$1,100 (enjoy around 15% discount). 2. Specific project pricing: Facial Rejuvenation: $40-$110/session. Pain Management: $30-$85/session. Post-operative restoration: $55-$140/session. 3.Reason for price difference: 20-40% higher price in first-tier cities. The use of imported equipment can be a premium of 15-30%. Specialist operation fee additional 15-50 USD/time.
1. Starter (daily care): $300-$1,100 2. Professional (chronic pain): $1,100-$4,200 3. Medical grade (instructed use): $4,200-$14,000
Pemf pulsed electromagnetic field therapy (PEMF) technology is a method that utilizes electromagnetic pulses of specific frequencies and intensities to stimulate human cells and tissues, promoting health and treating diseases, This technology is based on the principle of interaction between electromagnetic fields and biological organisms, delivering electromagnetic energy to the body in a non-invasive manner, thereby generating a series of biological effects.
Magnets and healing ring coil applicators release pulsed electromagnetic fields into human tissues and transmit high-intensity pulses deep into the tissues, which can accelerate the healing process of sports injuries, chronic pain, and degenerative joint diseases. By introducing magnetic field pulses into the body, the electrical charge within cells can be enhanced, speeding up cellular metabolism. This restores energy and enables effective cellular repair and tissue regeneration.
When the energy of the pulse electromagnetic field therapy penetrates into the human tissue, it produces damping oscillation, from strong to weak changes. It is more helpful for the recovery and regeneration of the muscle skeletal system. Its energy is fluctuating and will continue to provide strong stimuli for the organization. It is always so effective in the recovery process.
The larger treatment area
The entire processing surface of the circularphenomenon can release the electromagnetic pulse!Its energy is concentrated at one point, and thecoverage area is smaller. At the same time, you cantake out the PMST phenomenon from keeping thearm. In this way, the therapist can do a manualoperation to cover a larger treatment ared.
Doctors, dentists, physical therapists, and other medical professionals apply cold laser therapy in various ways, primarily for tissue repair, as well as for alleviating seasonal pain and inflammation. In the fields of sports medicine and pulse magnetic therapy, magnetic e resonance therapy is commonly used to treat minor injuries and sprains, such as:
During this process, low-intensity light of varying wavelengths and outputs is applied directly to the target area. After the human tissue absorbs the light, red and near-infrared light trigger reactions, prompting damaged cells to undergo physiological responses that promote regeneration and repair.
|
MT Mode |
|||||||
|
Zone |
Énergie |
requency |
Temps |
Séances |
Intervalle |
||
|
F1 |
F2 |
F3 |
|||||
|
Coude |
30 |
7 |
25 |
10 |
15 |
6-8 |
Twice a week |
|
Wrist |
30 |
7 |
25 |
10 |
15 |
6-8 |
Twice a week |
|
Shoulder Cervical |
50 |
10 |
29 |
13 |
20 |
6-8 |
Twice a week |
|
Vertebra Lumbar |
50 |
7 |
25 |
10 |
20 |
6-8 |
Twice a week |
|
Vertebra |
50 |
9 |
28 |
12 |
20 |
6-8 |
Twice a week |
|
Aine |
45 |
6 |
22 |
9 |
15 |
6-8 |
Twice a week |
|
Hanche |
60 |
12 |
29 |
15 |
20 |
6-8 |
Twice a week |
|
Thigh |
50 |
7 |
25 |
10 |
20 |
6-8 |
Twice a week |
|
Genou |
55 |
11 |
29 |
13 |
20 |
6-8 |
Twice a week |
|
Pied/Cheville |
40 |
7 |
25 |
10 |
15 |
6-8 |
Twice a week |
ST Mode | |||||||
Zone | Énergie | requency | Temps | Séances | Intervalle | ||
F1 | F2 | F3 | |||||
Coude | 30 | 1k | 3k | 2k | 15 | 6-8 | Twice a week |
Wrist | 30 | 1k | 3k | 2k | 15 | 6-8 | Twice a week |
Shoulder Cervical | 50 | 1k | 3k | 2k | 20 | 6-8 | Twice a week |
Vertebra Lumbar | 50 | 1k | 3k | 2k | 20 | 6-8 | Twice a week |
Vertebra | 50 | 1k | 3k | 2k | 20 | 6-8 | Twice a week |
Aine | 45 | 1k | 3k | 2k | 15 | 6-8 | Twice a week |
Hanche | 40 | 1k | 3k | 2k | 20 | 6-8 | Twice a week |
Thigh | 45 | 1k | 3k | 2k | 20 | 6-8 | Twice a week |
Genou | 40 | 1k | 3k | 2k | 20 | 6-8 | Twice a week |
Pied/Cheville | 35 | 1k | 3k | 2k | 15 | 6-8 | Twice a week |
1.12.1 inch display 2.Magnetic ring handle 3.Support arm 4.Near -infrared spectrum handle 5.Host button switch 6.Power socket
7.Power switch 8.Near -infrared interface 9.Magnetic ring handle interface 10.Water pouring outlet 11.Overflow 12.Outlet
♥ L'environnement dans lequel l'instrument est installé et utilisé nécessite propreté, faible poussière, température 5℃-35℃, humidité relative ≤80%, pas de particules corrosives, poussière conductrice, etc., et éviter les fortes interférences de champ magnétique ;
♥ Choisissez un endroit bien aéré, à ne pas placer à proximité de sources de chaleur telles que radiateurs, conduits de ventilation de chaleur ou endroits sujets aux vibrations mécaniques ;
♥ Afin de garantir la précision de l'énergie de sortie, veuillez garder toutes les pièces du port de sortie de la pièce à main de traitement propres ;
♥ Après avoir utilisé l'instrument, attendez 5 minutes, puis éteignez l'appareil, nettoyez la tête de traitement et conservez-la ;
♥ Lors du nettoyage de la salle de soins, évitez autant que possible de soulever la poussière, en particulier sur le sol recouvert de moquette, et assurez-vous que les bouches d'aération sont lisses ;
♥ Nettoyez soigneusement la tête de traitement régulièrement pour la garder propre, afin de ne pas affaiblir la sortie laser, vous pouvez utiliser du papier pour lentilles ou des cotons-tiges trempés dans de l'éthanol anhydre (alcool 95%) ou un nettoyant spécial pour lentilles pour essuyer délicatement ;
♥ N'utilisez pas de matériaux inflammables pour nettoyer et stériliser la tête de traitement et la zone de traitement pendant le fonctionnement ;
♥ N'utilisez pas d'essence, d'alcool, de diluant et d'autres chiffons traités chimiquement pour essuyer la surface du châssis ;
♥ La structure interne complexe de l'instrument, il est strictement interdit de le démonter par vous-même, veuillez vous assurer de contacter notre service des opérations client en temps opportun en cas de dysfonctionnement ;
♥ Afin d'assurer l'utilisation normale de l'instrument, l'achat ou le remplacement des accessoires de l'instrument, veuillez contacter directement le fabricant ou l'agent.
Strength | 7 Tesla |
Frequency in MT mode | 1-100Hz |
Frequency in ST mode | 1000-3000Hz |
Heat dissipation | Silent Water Circulation Cooling System |
Intuitive System | Preset parameters for ten body parts |
Wavelength of Laser | 650nm/808nm |
Infrared laser power | 500mW |
Puissance de sortie | 2200W |
Emballer | Alu box |
Personnalisation par lots :
Soutien marketing :
Personnalisation de l'apparence :
Personnalisation de l'interface du logiciel :
Personnalisation des accessoires :
Les fonctions de sécurité sont personnalisées :
Personnalisation des fonctions du logiciel :
Delya fournit des services professionnels OEM/ODM personnalisationn Un service pour vous aider à créer votre propre gamme d'appareils de beauté intelligents. Forts de notre riche expérience dans le secteur, technologies brevetées Grâce à notre chaîne d'approvisionnement mature et performante, nous sommes en mesure de répondre à vos besoins en matière de conception, de fonctionnalité et de qualité de nos produits. Choisissez Delya pour démarquer votre marque sur un marché concurrentiel !
Grâce à la personnalisation, les clients peuvent créer des produits uniques et augmenter leur compétitivité sur le marché jusqu'à 30%.
Les produits personnalisés mettent efficacement en valeur l'image de marque : 701 % des consommateurs déclarent avoir une perception plus favorable de la marque. Cela se traduit par une augmentation de 251 % de la valeur globale de la marque.
Des services personnalisés peuvent être adaptés pour répondre précisément aux besoins spécifiques de chaque client. La satisfaction client a augmenté de 40%.
La valeur ajoutée des produits personnalisés est généralement supérieure de 50%. Cette augmentation significative de valeur se traduit directement par une augmentation de 60% de la rentabilité du client.
Adoptez un emballage aéronautique et un film d'emballage étanche pour une protection optimale des marchandises. Différents modes de transport sont disponibles pour garantir une livraison sous 7 jours.
Fournir des données de marché, un programme d'exploitation, une formation opérationnelle, un soutien marketing et une protection des prix pour stimuler le marketing.
Nous offrons un service 24h/24 et 7j/7, résolvant les problèmes après-vente en moins d'une heure. Le mainframe est garanti 2 ans. Grâce à nos bureaux et centres de service au Japon et en Europe, nous garantissons une assistance internationale sans faille.
Fournissez des manuels détaillés et des vidéos d'utilisation professionnelles, les clients peuvent apprendre selon les manuels et peuvent être habiles.
Comme nos usines répondent aux exigences de gestion de la qualité ISO, les produits Delya sont fabriqués conformément aux normes CE, MSDS, RoHS et FCC. Au fil des ans, nous avons obtenu de nombreuses certifications afin de vous fournir une assurance qualité efficace.
1.What is pemf?
PEMF (Pulsed Electromagnetic Field) is a non-invasive physical therapy technique that works on the body’s cells through electromagnetic pulses of a specific frequency to promote the natural repair process.
2.What are the magnetic therapy side effects?
Mild dizziness/headache: most common in the first high-frequency treatment (20% of users), usually relieved within 30 minutes.
Numbness of the treatment area: caused by electromagnetic field stimulation of peripheral nerves, reduce the intensity can disappear.
Transient fatigue: normal response to accelerated cellular metabolism, it is recommended to replenish water after treatment.
3.What is magnetic therapy?
Magnetic Therapy (Magnetic Therapy) is a physical therapy that uses static magnetic fields or pulsed electromagnetic fields (PEMF) to act on human tissues.
4.Does pemf therapy really work?
Numerous studies have confirmed that PEMF is effective for specific conditions, but requires regular use and a full course of treatment. Home devices are less effective than medical models, and medical attention is recommended for serious conditions.
5.How to use magnets for healing?
Fix the magnetic sheet on both sides of the painful joint, with pulse magnetic therapy (frequency 5-10Hz), continuous use for 1 month pain can be reduced by 40-60%.
6.Does magnetic therapy work for lymphatic drainage？
7.8Hz (Earth’s Schumann Resonance Frequency) pulsed magnetic therapy can significantly improve the efficiency of lymphatic valve opening and closing, suitable for morning facial swelling. It is recommended to choose a device with “Biofeedback” function, which automatically adjusts the parameters according to the skin impedance.
7.Does magnetic therapy work for weight loss?
There are individual differences in the effectiveness of magnetic therapy for weight loss, and it is recommended that a body fat test be performed first. It is difficult to achieve ideal results by relying on magnetic therapy alone, and it needs to be used as an adjunct to a comprehensive weight loss program. Clinical data shows that the weight loss success rate can be increased by 40% when used in conjunction.
8.How to use magnets for pain?
1. Joint pain (arthritis/synovitis)
Bipolar Opposition Method (1 piece on each side of the painful joint), worn continuously for 12 hours a day, 50% pain reduction after 4 weeks (data from the journal Rheumatology).
2. Muscle aches and pains
Choose 10-15Hz pulsed magnetic therapy device, slowly move the treatment head along the muscle direction for 15 minutes each time, within 48 hours the soreness is relieved by 70%.
French 
English 
Dutch 
Spanish 
German 
Italian 
Portuguese 
Russian 
Turkish 
Arabic 
Thai 
Hindi 
Romanian